| 150 CC Engine Parameter |
| NO. |
Item |
Parameter in English Name |
| 1 |
Model |
single cylinder,4-stroke,air cool, diagonal type |
| 2 |
Max net power and the corresponding rotating speed |
7.9KW,8500±425r/min |
| 3 |
Calibration power and the corresponding speed |
7.0KW,8000±400r/min |
| 4 |
Max torque and the corresponding speed |
8.5.0N·m,7500±350r/min |
| 5 |
Minimum fuel consumption rate |
367g/KW·h |
| 6 |
Minimum no-load stable speed (idle) |
1500±100r/min |
| 7 |
Compression ratio |
9.2:1 |
| 8 |
Cylinder diameter × piston stroke |
56.5.0mm×49.5mm |
| 9 |
Cylinder working volume |
124.1ml |
| 10 |
Spark advance angle |
15°±2°~35°±2° |
| 11 |
The turning of output shaft |
Anticlockwise |
| 12 |
Ignition method |
C·D·I |
| 13 |
Lubrication method |
Pressure and splash lubrication at the same time |
| 14 |
Valve clearance (20 ± 10 ° C) |
Intake valve:0.03～0.05mm |
| Exhaust valve:0.03～0.05mm |
| 15 |
Idle emission |
CO≤2.0% |
| 16 |
HC≤250ppm |
| 17 |
Clutch model |
Multi-disk wet clutch |
| 18 |
Transmission model |
Fifth gear |
| 19 |
Starting method |
Kick + Electric start |
| 20 |
Carburetor |
CPZ26 |
| 21 |
Magnetic motor |
inner-rotor flywheel magneto |
| 22 |
Spark plug |
D8RC |
| 23 |
Oil bump |
Rotor type |
| 24 |
Starting motor |
12 V DC |
| 25 |
Gasoline |
RQ above 90# unleaded gasoline |
| 26 |
Lubrication oil type |
SAE 15W/40 SE |
| 27 |
Lubricating oil consumption rate |
8 g/kw·h |
| 28 |
Filling amount of lubrication |
1.0L |
| 29 |
Dimensions (Length/Weight/Height) |
361mm×328mm×429mm |
| 30 |
Net weight |
31.5kg |
| 150CC Engine Parameter |
| NO. |
Item |
Parameter in English Name |
| 1 |
Model |
single cylinder,4-stroke,air cool, diagonal type |
| 2 |
Max net power and the corresponding rotating speed |
8.5KW,8500±425r/min |
| 3 |
Calibration power and the corresponding speed |
7.5KW,8000±400r/min |
| 4 |
Max torque and the corresponding speed |
10.0N·m,7000±350r/min |
| 5 |
Minimum fuel consumption rate |
354g/KW·h |
| 6 |
Minimum no-load stable speed (idle) |
1500±100r/min |
| 7 |
Compression ratio |
9.0:1 |
| 8 |
Cylinder diameter × piston stroke |
62.0mm×49.5mm |
| 9 |
Cylinder working volume |
149ml |
| 10 |
Spark advance angle |
15°±2°~35°±2° |
| 11 |
The turning of output shaft |
Anticlockwise |
| 12 |
Ignition method |
C·D·I |
| 13 |
Lubrication method |
Pressure and splash lubrication at the same time |
| 14 |
Valve clearance (20 ± 10 ° C) |
Intake valve:0.03～0.05mm |
| Exhaust valve:0.03～0.05mm |
| 15 |
Idle emission |
CO≤2.0% |
| 16 |
HC≤250ppm |
| 17 |
Clutch model |
Multi-disk wet clutch |
| 18 |
Transmission model |
Fifth gear |
| 19 |
Starting method |
Kick + Electric start |
| 20 |
Carburetor |
PZ27 |
| 21 |
Magnetic motor |
inner-rotor flywheel magneto |
| 22 |
Spark plug |
D8RC |
| 23 |
Oil bump |
Rotor type |
| 24 |
Starting motor |
12 V DC |
| 25 |
Gasoline |
RQ above 90# unleaded gasoline |
| 26 |
Lubrication oil type |
SAE 15W/40 SE |
| 27 |
Lubricating oil consumption rate |
8 g/kw·h |
| 28 |
Filling amount of lubrication |
1.0L |
| 29 |
Dimensions (Length/Weight/Height) |
350mm×329mm×430mm |
| 30 |
Net weight |
32kg |
Our Service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got thegoods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offerthe solve way for you.
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost andthe courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.
